Toilet renovation: to Begin

The bathroom is an area with particular terms: high humidity, humidity differences. That’s why making repairs in the restroom, you need to clearly plan the whole working process, to think about the sequence of steps to be achieved. Within this guide, you will learn where to begin the fix in the restroom and what sorts of work should be carried out with your hands. Step-by-step directions for bathroom repair

Phase 1: drawing up a strategy and picking a layout solution.

Fix in the bathroom can be of two types:

  • Unplanned, spontaneous, arising from the can of unexpected circumstances. By way of example, in the event of a pipe burst, flooding by neighbors.
  • Planned, that can be either cosmetic or capital. It requires planning, serious monetary investment and time.

Begin repairs at the bathroom is to ascertain the design, inside. Think through the last detail, what will be the room, choose a color. Pastel colours are traditional, in addition to a combination of blue and blue, or peach with beige.

Begin repairs at the bathroom is to determine the design, interior design. Think in detail, what’s going to be the space, choose a color. Pastel colors are thought to be traditional, in addition to a blend of colors.

Next point is that the choice of facing material. Usually, finishing at the toilet is done with tile, porcelain tiles, mosaic, plastic panels. Check the pipes, whether it needs to be replaced. If necessary, pick a suitable alternative. Proceed to the measuring work: measure all sides, figure out the area of the room. Based on these information, we mark the location of the plumbing fixtures.

Step 2: the choice of sanitary fittings and material for finishing.

It’s necessary to see that the purchase of sanitary ware precedes the preparation stage, rather than vice versa. This means that first we develop a design project, make a plan, then go to the shop. Another thing – you need to specify how big your favourite plumbing fixtures and examine the program, whether it matches.

It is very important to recognize that the purchase of plumbing fittings is completed by a preparation period, rather than vice versa. This usually means that first we develop a design project, create a plan, then go to the store. Another one

In terms of stuff for finishing, it’s preferable to purchase them immediately for the whole repair cycle, so that you will not be distracted if something was missing. Do not forget about preparing the necessary tools.

Measure 3: dismantling plumbing and tiling.

After All of the preliminary work is done, move on to the Start of the task process:

  • Remove the sink and tub from the space, even if they won’t be replaced with new ones. This way, you are able to keep them clean and undamaged.
  • Remove the tile, cleaning after it all of surfaces: ceiling, walls, floor.
  • Remove old paint from the walls, if they had been formerly painted, since the adhesive alternative or a new layer of paint won’t stick to the surface.

Measure 4: Cost of communications: pipes, electrical wiring.

Quite frequently in an old home, you ought to carefully inspect and replace not just the pipes that are in the bathroom itself, but also the main riser, and at times the interfloor pipes. Why is it worth doing so? Old pipes at any time may give a leak, then the new fix will be spoiled, it will require additional investment to eliminate defects.


Leave a Comment

Your email address will not be published.